Premier Mounts PP-FCTA-QL Bedienungsanleitung PDF herunterladen (Seite 5)

PP-FCTA-QL

1) Separate the escutcheon ring and the hole saw.

2) Attach the hole saw to a hand held drill. If no drill is

available, you may turn by hand.

3) Determine where the hole will be and mark this

location with a pencil (A).

4) Place the hole saw over the spot where the mark was

made (B).

5) Carefully depress the trigger on the hand held

drill and begin to drill the hole, being careful not to

damage the ceiling tile (B).

6) Once complete, place the drill off to the side and pick

up the escutcheon ring.

7) Line the escutcheon ring up with the drilled hole in the

ceiling tile (C).

8) Insert the escutcheon ring into the hole and gently

push it into place (D).

(A)

(B)

Ceiling Tile

Drill

Hole Cutter

Mounting Hole

Escutcheon Ring

(C)

(D)

Hand

Escutcheon

Ring

The escutcheon ring has been designed for use with

1-½˝ and 2˝ NPT.

Cutting the Access Hole

Escutcheon Ring

Hole Saw

Observe the room and the ceiling; nd the most

appropriate location for the projector placement and

lightly mark the bottom of the tile.

Proceed to the ″Mounting the PP-FCTA-QL″ on

page 6.

You may need to pinch the escutcheon ring into

place. This can be done by taking your index nger

and placing it up into the mounting hole and pressing

down from the top. Your thumb will press up from the

bottom, effectively pinching the escutcheon ring into

place.

Page 5

1 2 3 4 5 6 7 8 9 10 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Premier Mounts PP-FCTA-QL Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für Wand- und Deckenhalterungen Premier Mounts PP-FCTA-QL